Electron Engine ™
Printed Circuit Boards by Emissionlabs ®
EE21 Multi Purpose Board V6.3. For MC, and Input/Output
Version 6.4 has very small changes in board lay out (not documented) and different numbering of the Jumpers. Functionality of V6.4 and 6.3 is the same.
Please refer to the description of Version 6.4, but take note of the changes with the Jumpers numbering as in this table below:
Version 6.4 |
Version 6.3 |
Function |
J1,J2, J3 | J1,J2, J3 | DIP Switch (unchanged) |
J6 | J1 | Gain Setting |
J5 | J2 | Gain Setting |
J4 | J3 | Gain Setting |
J7 | J6 | Center Tap on H-Side |
J8 | J5 | Short the Potentiometer |
J9 | J4 | Center Tap on L-Side |
J10 | J8 | Activate Frequency Correction |
J11 | J7 | Short the Capacitor |