Last modified: 29-Sep-2014

YAMAMOTO SOUNDCRAFT / EQUIPMENT STANDS

Attential all black African wood from Yamamoto is from historical, old supplies.


2...10kg per piece

MGB-1 Neodyme magnetic equipment stands

Hese are the unique YAMAMOTO MGB-1 magnetic equipment stands.  They are made from black African Ebony wood.   On the top of the stands are three plates of ceramic material.  Inside the Ebony wood are two Neozeme magnet rings, these have the strength to carry 2...10 kilogram  for one stand.   Just put the stands under the equipment, no mounting is required.  With these there is no mechanical contact of the equipment to the bottom. The equipment is floating  free, resting completely on the magnetic field only. The best results are with any equipment with moving parts in it,  like record and CD players,  and with microphonic sensitive equipment like tube amplifiers and preamplifiers. 

MGB-1 Technical data 
  • Outside dimension: 59mm in diameter, and height:58.8mm -47mm
  • Quality of the material: An African blackwood, Neozium magnets, ceramic spacers
  • Withstand load: 2kg - 10kg per piece
  • Weight: 210g (one piece)
  • Diameter: 59mm  

VGP Design Award goes to Yamamoto MGB-1 feet




0,9 ...3kg per piece

MGB-2 Neodyme magnetic equipment stands
  • Outside dimension: 59mm in diameter, and height:58.8mm -47mm
  • Quality of the material: An African blackwood, Neozium magnets, ceramic spacers
  • Withstand load: 0,9kg - 3kg per piece
  • Weight: 170g (one piece)
  • Diameter: 49mm


JAPANESE Audio Excellent Award 2009

AEX 2009 award goes to YAMAMOTO SOUNDCRAFT of JAPAN, for MGB-2 magnetic feet having outstanding product performance and unique design. This is following the 2007 award that was given for the MGB-1 as well.



PB09 Equipment Stand

Dimensions:  34 x 12 mm. 
Height of the pin: 5 mm
Material: the African ebony (specific gravity about 1.4)

Attention1: This picture is mixed of four types, but in the pricelist we have a price for a set of 4pcs PB09. 

Attention2: PB09 can be used with or without out the PB10



PB10 Equipment Stand.

Dimensions:  12 x 34 mm. 
Height of the pin: 3,5 mm
Material: the African ebony (specific gravity about 1.4)

Attention1: This picture is mixed of four types, but in the pricelist we have a price for a set of 4pcs PB10. 

Attention2: PB09 can be used with or without out the PB10



PB20 Equipment Stand

Dimensions:  41 x 22 mm. 
Height of the pin: 5 mm
Material: the African ebony (specific gravity about 1.4)

Attention1: The price in the pricelist is for a set of 4pcs. 

Attention2: PB20 can be used with or without out the PB21



PB21 Equipment Stand

Dimensions:  41 x 22 mm. 
Depth the pin hole: 3,5 mm
Material: the African ebony (specific gravity about 1.4)

Attention1: The price in the pricelist is for a set of 4pcs. 

Attention2: PB21can be used with or without out the PB20  



PB21 Equipment Stand

Dimensions:  41 x 22 mm. 
Depth the pin hole: 3,5 mm
Material: the African ebony (specific gravity about 1.4)

Attention1: The price in the pricelist is for a set of 4pcs. 

Attention2: PB21can be used with or without out the PB20  



PB23 Equipment Stand

Usually, although metal is used for spikes bases in many cases, a resonance sound peculiar to metal appears in many cases. Since PB-23 is made of wood, it can prevent this resonance sound, and it can obtain the original sound of the music, which is comfortable to the ear. If a metaled plate receives a metal spike pin especially, resonance sound will ride easily, but by combining PB-23, metallic resonance can be prevented.

Also it can be combined with Yamamoto PB-9 of PB-20, which are spikes of wood.

Specifications:

  • Withstand load: 25kg for one, and maximum 100kg for four pcs together
  • Outside dimensions: 20 x 59mm
  • The diameter of a central hollow: 11mm
  • The depth of a central hollow: 3.5mm
  • The angle of a central hollow: About 110 degrees
  • Material: African ebony from historical supplies, old stock materials. Specific gravity 1.4

Attention: The price in the pricelist is for a set of 4pcs. 



PB18 Equipment Stand, receptacle for spikes

  • No more floor scratching by spikes. Still the ceramic will decouple intwo axis directions too.
  • Load 60kg, for all together. So 15kg one.
  • Quality of the material (main part part) : African Black Wood pure material
  • Quality of the material (three-point grounding part): alumina ceramic (alumina 96)
  • Dimensions: 38(W) x38(D) x18.5 (H) Depth:
  • Weight 130g (four pieces).

Attention: The price in the pricelist is for a set of 4pcs. 

PB22 Equipment Stand

There are many cases where a typical metallic resonance sound will be guided from metal spikes. These can playback into the music reproduction in many ways. The PB22 is another solution by Yamamoto, that prevents those resonance sound and become perfectly clear to the ear comfortably.

The use method establishes the squear of 90 degrees of the triangle to etc. 3 pieces or 4 pieces toward the top under the bottom board or foot of the use devices. The direction of the crest line of the top is able to use even which of the front and back direction or right and left direction. It confirms with oneself because there is a difference in the sound subtly by the difference of the direction and please decide. When it makes 2 pieces (or 1 piece) of after opposite direction with 2 pieces of before and also the sound change. Mainly the extent and reverberation of the sound seem to change. Please confirm the use method that fit the device of oneself. Even such a method that piles the same product for 2 steps and make the height of high and also, use 2 pieces and use the squear of 45 degrees toward the top is possible because PB-22 is comparatively low cost. Please try it once!

Specifications:

  • External form measure: 38 x 25 x 25mm
  • Height of the base: 18 mm
  • Material: Southeast Asian Striped ebony (specific gravity about 1.1). This is the same material as used for quitar necks, very musical material, with low resonance.

Attention: The price in the pricelist is for a set of 4pcs. 



VB-18 Equipment Stand

Specifications

  • Use with: Speaker system, Amplifiers, Digital recorder, CD player, Analog player, etc..
  • Use material : the striped ebony from Southeast Asia
  • Outside dimension : 25(W)x27(H)x180(D)
  • Maximum Withstand load for one piece: 40kg
  • Weight : VB-18 : 120g (one piece)
  • Finish and it is :clear eco-paint paint finish.

Attention1: The price in the pricelist is for a set of 2 male parts and 2 female parts. So actually the set of materials, just as on the picture.



VB-25 Equipment Stand

Specifications

  • Use with: Speaker system, Amplifiers, Digital recorder, CD player, Analog player, etc.
  • Use material : the striped ebony from Southeast Asia
  • Outside dimension : 35(W) x33(H) x250 (D)
  • Maximum Withstand load for one piece: 60kg
  • Weight : VB-25 : 320g (one piece)
  • Finish and it is :clear eco-paint paint finish.

Attention1: The price in the pricelist is for a set of 2 male parts and 2 female parts. So actually the set of materials, just as on the picture.