6N6P driver for 300B tube

(General) Forum about other items than listed below

6N6P driver for 300B tube

Postby beks » Sat Feb 20, 2016 12:18 am

Hi
on search for 6N6P driver for 300B tube I came across your website and I checked circuits you designed, and question I have is can the circuit for 300B you posted with 6H30 modified for 6N6P tubes?
http://www.4tubes.com/SCHEMATICS/LUNDAH ... Page-1.JPG

As well, on your website there is another schematics with KT120 with 6N6P as driver but some resistor values are missing.
http://4tubes.com/SCHEMATICS/LUNDAHL-TR ... Gesamt.pdf

I have the tubes and I was wondering, can 6N6P drive two 300B in parallel single ended design without negative biasing?

Your answer is highly appreciated.

Regards,
beks
beks
 
Posts: 2
Joined: Sat Feb 20, 2016 12:05 am

Re: 6N6P driver for 300B tube

Postby J. Leven » Sat Feb 27, 2016 5:20 pm

Hallo,
die 6H30 mit der 6N6P direkt zu tauschen geht nicht,
die ganze Treiberschaltung die auch DC gekoppelt ist muss angepasst werden

eine 6n6P sollte eine 300B in PSE Schaltung treiben können,
das NGV spielt dabei gar keine Rolle

Grüße, J.L.
J. Leven
 
Posts: 170
Joined: Fri Jan 13, 2012 12:27 pm

Re: 6N6P driver for 300B tube

Postby beks » Sat Feb 27, 2016 6:24 pm

Hello,
Thank you for reply. :)

Would you share a design with values and what voltages to supply 6N6P for this circuit?
Kindly provide or explain what circuit will be best suitable to run in PSE 2x 300B using the 6N6P tube.

Best Regards,
beks
beks
 
Posts: 2
Joined: Sat Feb 20, 2016 12:05 am

Re: 6N6P driver for 300B tube

Postby J. Leven » Thu Mar 03, 2016 2:52 pm

Hallo,
ich werde wohl die 6N6P und andere Röhren als Treiber für die neue 300B PSE Version testen ,

beste Grüße, Jörg
J. Leven
 
Posts: 170
Joined: Fri Jan 13, 2012 12:27 pm


Return to HiFi Equipment Forum

Who is online

Users browsing this forum: No registered users and 1 guest

cron