EML 30A in two stage amplifier (211, TM100, RS237...)

About the Emission Labs tubes and how to use them.

EML 30A in two stage amplifier (211, TM100, RS237...)

Postby AJMARS » Sun Aug 24, 2014 3:49 pm

Two years ago a started a project to build a two (or eventually 3) stages amplifier using big triodes.
My first project was to use the French TM100 (Mazda) or his Dutch complement the MC1/60.... I rapidly add the german RS237, and the american cousin, the 211/VT4C, to constitute the "gang of four"

Gang of four.jpg
Gang of four.jpg (93.99 KiB) Viewed 3573 times

VT4B, RS237, TM100 and MC1/60 from my personal collection



VT4C Box.jpg
VT4C Box.jpg (114.2 KiB) Viewed 3572 times

GE VT4C in a military box.

The amplifier was designed in 3 blocs, two power blocs, with mainly the "big" triode, the 1020V power supply, the 10V (or 4V) filament supply, the output transformer, and a separate input/driver stage. The chosen output transformer was the F2013 from Tamura.
For the input/driver several configurations were tested

A single EC86 triode
An ECC35 plus WE VT52 triodes
A triode mounted C3g single
A triode mounted C3g plus 10Y triode
An EML 30a single


EML 30a 211.jpg
EML 30a 211.jpg (88.2 KiB) Viewed 3572 times

A view of the amplifier with EML30a first stage and the two power stages (using 211/VT4C from GE)


To be continued...

André
AJMARS
 
Posts: 1
Joined: Sun Aug 24, 2014 3:36 pm

Re: EML 30A in two stage amplifier (211, TM100, RS237...)

Postby CharlesJk8 » Wed Apr 01, 2015 11:33 am

Is it conceivable to harm the Heaters/Filaments if HighVoltage is connected to the frosty tube? Will the Tubes KT88 and EML300B keep going for more time if the HighVoltage is connected at a later time, contrasted with the warming Power?
CharlesJk8
 
Posts: 1
Joined: Wed Apr 01, 2015 11:30 am


Return to EML FORUM

Who is online

Users browsing this forum: No registered users and 2 guests

cron