EML 5U4G

About the Emission Labs tubes and how to use them.

EML 5U4G

Postby gianni321 » Tue Aug 12, 2014 1:47 pm

Hi Everyone,

I would like to buy a pair EML 5U4G tube in my Cary SLI 80 amp. This tube is high (175mm) and wide (60mm). If I put in my amp the distance/gap between the two tubes is 2-3 mm. Is it enough for the safe operation?????
gianni321
 
Posts: 1
Joined: Tue Aug 12, 2014 1:29 pm

Re: EML 5U4G

Postby sameer » Sat Nov 15, 2014 11:15 am

The amplifier was designed in 3 blocs, two power blocs, with mainly the "big" triode, the 1020V power supply, the 10V (or 4V) filament supply, the output transformer, and a separate input/driver stage. The chosen output transformer was the F2013 from Tamura.
sameer
 
Posts: 1
Joined: Sat Nov 15, 2014 11:12 am

Re: EML 5U4G

Postby 016hnoor » Fri Mar 27, 2015 3:05 am

If I put in my amp the distance/gap between the two tubes is 2-3 mm.
016hnoor
 
Posts: 1
Joined: Fri Mar 27, 2015 3:03 am


Return to EML FORUM

Who is online

Users browsing this forum: No registered users and 4 guests