EML 300B dimensions

About the Emission Labs tubes and how to use them.

EML 300B dimensions

Postby lowpitch » Mon Nov 18, 2013 11:05 am

Hi, What are the correct dimensions of the EML 300B and the 300B mesh? There appears to be a mistake on the tech data sheets. 300B mesh is shown as 155 x 65mm high, 300B is shown as 165 x 65mm.

Thanks and best rgds, martin
trying to decide on mesh vs std 300B
lowpitch
 
Posts: 3
Joined: Mon Nov 18, 2013 10:56 am

Re: EML 300B dimensions

Postby cpdoc » Thu Nov 21, 2013 3:44 pm

Hi Martin,
since nobody seems to solve your problem here are my conclusions . EML quote that the 300BM has the same physical dimensions as the 520B, this is 200 x 68 mm2.This seems reasonable looking at the pictures (comparison 300B and 300BM).
Best
Wolfgang
cpdoc
 
Posts: 17
Joined: Sat Dec 01, 2012 3:13 pm

Re: EML 300B dimensions

Postby lowpitch » Thu Nov 21, 2013 4:33 pm

Thanks Wolfgang, bigger than a 211 !
martin
lowpitch
 
Posts: 3
Joined: Mon Nov 18, 2013 10:56 am

Re: EML 300B dimensions

Postby lowpitch » Thu Nov 21, 2013 4:40 pm

I scaled the photo of the 300B-mesh and assuming the height of the base is 27mm which seems to be a standard for UX4, I calculate the overall height of the tube to be 180mm.

I also scaled the photo of the 300B-M beside the 300B. The 300B-M is 1.1666 bigger. If the 300B is 155mm high then the 300B-M is 180 high. (original WE 300B is 151mm)

martin
lowpitch
 
Posts: 3
Joined: Mon Nov 18, 2013 10:56 am

Re: EML 300B dimensions

Postby alison3492 » Wed Jan 14, 2015 1:30 pm

Last edited by alison3492 on Mon Feb 02, 2015 1:54 pm, edited 1 time in total.
alison3492
 
Posts: 1
Joined: Wed Jan 14, 2015 1:29 pm

Re: EML 300B dimensions

Postby J. Leven » Thu Jan 15, 2015 11:16 am

Hi,
here is a picture 300B 300BM
Attachments
300B-300BM.jpg
300B-300BM.jpg (114.92 KiB) Viewed 4536 times
J. Leven
 
Posts: 170
Joined: Fri Jan 13, 2012 12:27 pm


Return to EML FORUM

Who is online

Users browsing this forum: No registered users and 1 guest

cron